Custom Feeder Systems & Escapements

A sensor in the bowl signals the hopper to dispense fasteners when the low level limit is reached, keeping the bowl at the optimum level of fasteners, leading to longer bowl life and more efficient feeding.

Visumatic has developed a series of exclusive feeder escapement designs, to handle
• Difficult to manage and place fasteners
• Run of the mill screws, nut, bolts, rivets, pins and studs
• Extreme sizes - very long, very short, very small

The range of feeder designs available guarantees Visumatic can accommodate your part and any fastener you will need to install today and in the future.

The Visuatic Advant-edge
• Simple – with one moving part
• Escapements are designed for your
   requirements in these configurations:

M-75 Standard Escapement	C-95 Cam Escapement
F-85 Finger Escapement	N-99 Nut Escapement

Features:
• Feeder bowl control for low power consumption
• High flow valves
• Microcontroller board-level electrical controls
    - Maintain the optimum level of fasteners
    - Maintain the feeder cycle and blow rate
    - Provide maximum flexibility and options
• Microprocessor feeder controls are readily serviceable
• Handles a gross box of fasteners – 30-40 lbs
    - Operator adds screws 80% less often!
    - Steel enclosure protects from dirt and debris
    - Makes a cleaner, safer workspace
• System diagnostic
• Surge protection
• Stock stainless steel or poly-coated cast aluminum vibratory bowl
• Other vendor-specified bowls are no problem
• Automatic feeder bowl shut off
    - Integrator control option
    - Empty bowl alarm relay
    - Pressure and proximity feed qualification
    - Automatic remote feed interface
• Bulk supply hoppers available

Built Better.   Simple.   Single Movement.